MetaSole+ Mounting Bracket for Trapezoidal Roofs
Renusol

Part No: REN-420402

METASOLE+ METAL SHEET THICKNESS: STEEL 0.40-1.25MM; ALU 0.50-2.00 MM

Cost-effective rooftop mounting system for trapezoidal/IBR and corrugated sheet metal roofs. This part allows your system to be attached to the roof with self-tapping screws, rather than drilling through the sheet into the substructure with hanger bolts. The added bonus is that no mounting rail is required, which reduces the cost of the mounting dramatically.

2x mounting screws included

NOTE: Adapter REN-420401 is required for corrugated roofs.

NOTE: If additional panel-to-roof clearance is required, the following roof anchor can be used as an alternative: REN-420423

Technical Data

• For PV systems with framed pv-modules from 30 to 50 mm frame height.
• Module orientation: Horizontal (landscape)
• Size: 125x31x17 mm
• Weight: 0,084 kg
• EPDM pre-assembled
• Rail length: 125,0 mm
• Material: Aluminum
• Certification: TÜV ID: 1111212485; MCS012 IK0197/02
• Screw Ø: 6,0 mm
• Applicable with: Sheet metal
• Roof decking: Trapezoidal sheet metal
• Min. width of rib: 20 mm
• Material of roof sheet: Steel; Aluminum
• Metal thickness aluminum: 0,50 - 2,00 mm
• Metal thickness steel: 0,40 - 1,25 mm

Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so will void the warranty of the mounting system.